Transtector - TSJ 48-CLT, T1/E1 protector, RJ45 and screw terminals, SASD - 1101-300-1

Transtector / Polyphaser - TSJ 48-CLT, T1/E1 protector, RJ45 and screw terminals, SASD - 1101-300-1

Application: The TSJ-48-CLT Surge Suppressor is a high-speed, high-current, solid-state device designed to protect equipment from transient over voltages on data lines. Continuous bi-polar, bi-directional, non-interrupting protection is provided. The TSJ-48-CLT automatically resets after each suppression function with no degradation of protection capabilities. This suppressor utilizes silicon junction avalanche suppressor diodes as its sole suppression technology. The unit is fused as required by UL 497A. At maximum power dissipation the suppressor will not exceed the maximum voltage protection level. It is housed inside a non-metallic enclosure with a U.L. fire rating of 94-5V. It attaches via two modular RJ48C receptacles or two (2) four position terminal blocks. It includes a ground stud that must be connected to system ground.

Electrical Performance: Connector Style: RJ45 Data Rate: 1.44/2.048 Mb/s Protected RJ 45 Pins: (1,2) and (4,5) Protection Modes: L-L & L-G Nominal Operating Voltage: 5VDC Maximum Continuous Operating Voltage: 12V peak Maximum Surge Capability: 100A 10/1000ms per Telcordia GR-1089-CORE Maximum Voltage Protection Level: 25V peak @ 100A 10/1000ms Response Time (Max): 5 nanoseconds Leakage @ Max Voltage: 5.0 microamps Attenuation: -3db @ 90MHZ Fusing: per UL497A Safety: Approved to UL 497A